QTREE-SDMX Smart Data Multiplexer


The QTREE-SDMX multiplexers is a muti-channel data transmitter from Mitutoyo or Mahr gauges to computer. The transmitter converts data from the DIGIMATIC interface into the USB interface. Application programs work with embedded character data through the serial port interface (COM port). The transformation of USB to COM is performed by the operating system. Output data formats and commands for communication are compatible with Mitutoyo multiplexers. For this reason, multiplexers are not solely dependent on QTREE application programs and work with application programs from various independent software providers.

 

QTREE-SDMX4/8-TE - Terminal for controlling control workplaces without a PC

Unique solution!

The terminal is designed to operate Mitutoyo and Mahr gauges at control workplaces without a computer. It is therefore equipped with an easy to read, backlit, monochrome, graphic display; cross controller and programs for controlling measurements. Controlled products and their control plans are stored in the device. The operator can see at any time what product is being controlled, what parameter is being measured, what the tolerance limits are and what the meter should use. The operator can continuously check whether the measured value is within the tolerance limits or repeat the measurement. The navigation table is displayed for orientation and navigation in the measured values of the control sampling parameters and samples. Once all the required measurements have been completed, the complete checklist is sent via the Bluetooth interface to the PC or stored in the internal memory of the device for later use.

QTREE-SDMX Terminal Manager software is available for the easy management, configuration, and visualization of the measured data. With this application, export records can be exported to CSV (MS Excel) or Q-DAS ASCII Transfer Format. For this reason, QTREE-DUM 4/8-TE does not depend solely on QTREE SPC software. In the words, other application program can be used for data evaluation.

The multiplexer can be used in on of two operating modes - TERMINAL / MULTIPLEXER, whereby in MULTIPLEXER mode it is completely data and command compatible with other QTREE multiplexers or Mitutoyo multiplexers.

Technical specifications:

  • 2 operating modes TERMINAL/MULTIPLEXER.
  • 4 or 8 input channels for DIGIMATIC (Mitutoyo, Mahr) gauges.
  • Memory capacity for storage of X workers, Y products (control plans), 20 complete control subscriptions (value tables for 16 parameters and 8 samples).
  • Industrial Bluetooth interface for communicating with computer in TERMINAL mode with 100 meter reach in industrial halls. This is an industry standard with far greater reach than we know from mobile phones.
  • Application programs communicate with the Bluetooth interface via a virtual COM port.
  • Standard USB interface for communication with computer.
  • Application programs communicate with the USB interface via a virtual COM port.
  • Easy-to-read, backlit, monochrome, graphic LCD display.
  • Cross controller with microswitches.
  • One foot switch for controlling data input from all input channels.
  • Aluminum box with engraved indelible labels.
  • One fully independent RS232 / USB converter for Multiplexer mode.
  • In Multiplexer mode, data and commands are compatible with Mitutoyo multiplexers.
  • Data export into CSV (MS Excel) or ASCII Q-DAS Transfer Format.
  • 230V power supply via USB adapter (in TERMINAL mode) or from USB port (MULTIPLEXER mode).

 

QTREE-SDMX4/8 - Multiplexer for 4/8 channels

      

Technical specifications:

  • 4 or 8 input channels for DIGIMATIC (Mitutoyo, Mahr) gauges.
  • Standard USB interface for communication with computer.
  • Application programs communicate with the USB interface via a virtual COM port.
  • One foot switch for controlling data input from all input channels.
  • One fully independent RS232 / USB converter for any use.
  • Second foot switch for any use.
  • Aluminum box with engraved indelible labels.
  • Data and commands are compatible with Mitutoyo multiplexers.
  • Powered by USB port connected computer.

 

QTREE-SDMX4/8-RS - Multiplexer for 4/8 channels with USB and RS232 outputs

      

Technical specification:

  • 4 or 8 input channels for DIGIMATIC (Mitutoyo, Mahr) gauges.
  • Standard USB and RS232 interface for communication with computer.
  • Application programs communicate with the USB interface via a virtual COM port.
  • One foot switch for controlling data input from all input channels.
  • One fully independent RS232 / USB converter for any use.
  • Second foot switch for any use.
  • Aluminum box with engraved indelible labels.
  • Data and commands are compatible with Mitutoyo multiplexers.
  • Powered by USB port connected computer.

 

QTREE-SDMX5/9 - Combined multiplexer with inputs Digimatic and RS232

      

Technical specifications:

  • 4 or 8 input channels for DIGIMATIC (Mitutoyo, Mahr) gauges.
  • One input channel for a RS232 meter (e.g. digital scales).
  • Standard USB interface for communication with computer.
  • Application programs communicate with the USB interface via a virtual COM port.
  • One foot switch for controlling data input from all input channels.
  • One fully independent RS232 / USB converter for any use.
  • Second foot switch for any use.
  • Aluminum box with engraved indelible labels.
  • Data and commands are compatible with Mitutoyo multiplexers.
  • Powered by USB port connected computer.

 

 

        

Technical specifications:

  • 12 input channels for DIGIMATIC (Mitutoyo, Mahr) gauges.
  • Application programs communicate with the USB interface via a virtual COM port.
  • Standard USB interface for communication with computer.
  • One foot switch for controlling data input from all input channels.
  • One fully independent RS232 / USB converter for any use.
  • Aluminum box with engraved indelible labels.
  • Data and commands are compatible with Mitutoyo multiplexers.
  • Powered by USB port connected computer.

 

QTREE-SDMX4/8-BT - Wireless multiplexer for 4/8 channels

            

The Multiplexer is designed for situations where the distance from the computer is greater than 3 m (this is the maximum length of the USB cable).

Technical specifications:

  • 4 or 8 input channels for DIGIMATIC (Mitutoyo, Mahr) gauges.
  • Standard USB interface for communication with computer.
  • Application programs communicate with the USB interface via a virtual COM port.
  • Industrial Bluetooth interface for communicating with computer in TERMINAL mode with 100m reach in industrial halls. This is an industry standard with far greater reach than we know from mobile phones.
  • Application programs communicate with the Bluetooth interface via a virtual COM port.
  • One foot switch for controlling data input from all input channels.
  • Second foot switch for any use.
  • One fully independent RS232 / USB converter for any use.
  • Aluminum box with engraved indelible labels.
  • Data and commands are compatible with Mitutoyo multiplexer.
  • Powered by USB port connected computer.

 

Current prices:

QTREE-SDMX1 1-channel transmitter Mitutoyo Digimatic - USB – Also usable for PDAs EUR 145 CZK 3.500
QTREE-SDMX4 4-channel transmitter Mitutoyo Digimatic - USB EUR 265 CZK 6.700
QTREE-SDMX4-RS 4-channel transmitter Mitutoyo Digimatic - USB/RS232 EUR 305 CZK 7.600
QTREE-SDMX4-BT 4-channel transmitter Mitutoyo Digimatic - USB/Bluetooth EUR 350 CZK 8.700
QTREE-SDMX5 5-channel transmitter Mitutoyo Digimatic (4x Mitutoyo, 1x RS232) - USB EUR 305 CZK 7.600
QTREE-SDMX8 8-channel transmitter Mitutoyo Digimatic - USB EUR 576 CZK 14.400
QTREE-SDMX8-RS 8-channel transmitter Mitutoyo Digimatic - USB/RS232 EUR 658 CZK 16.400
QTREE-SDMX8-BT 8-channel transmitter Mitutoyo Digimatic - USB/Bluetooth EUR 658 CZK 16.400
QTREE-SDMX9 9-channel transmitter Mitutoyo Digimatic (8x Mitutoyo, 1x RS232) - USB EUR 617 CZK 15.400
QTREE-SDMX4-TE 4-channel transmitter for collecting data from Mitutoyo Digimatic -USB/Bluetooth EUR 700 CZK 17.500
QTREE-SDMX8-TE 8-channel transmitter for collecting data from Mitutoyo Digimatic -USB/Bluetooth EUR 1.030 CZK 25.600
QTREE-SDMX12 12-channel transmitter Mitutoyo Digimatic - USB EUR 782 CZK 19.500
Nožní spínač 971-S Foot switch with 2 m cable and 3,5 mm jack connector EUR 49 CZK 1250
QTREE-SDMX Terminal Manager Software for operating terminals QTREE-SDMX4-TE and QTREE-SDMX8-TE EUR 65 CZK 1.750

 Prices ex. VAT

 

QTREE-SDMX Multiplexer

Introducing the QTREE-SDMX Multiplexer. We offer our customers multi-channel data transmitters, from Mitutoyo or Mahr gauges (both with DIGIMATIC interface). Multiplexers are used to transfer data from gauges to a computer via a USB, either standard wire or wireless. The electronics of the device are installed in a solid, anodized aluminum box. It can resist the demanding conditions associated with engineering or plastics production.

Read on...

QTREE-CAQ Monitor.NET

Introducing QTREE-CAQ Monitor.NET - Quality monitoring system. We offer our customers a unique product that can be used both for monitoring and controlling the production of discrete parts (mechanical engineering, automotive) and for the laboratory inspection of continuous production processes (food, chemical, building materials), as well as for the final inspection and testing of final products and whole assemblies.

Read on...

Automatic Data Import from 3D

We offer our customers an automated data import solution from 3D measuring devices. This is the basic feature of QTREE-CAQ Monitor.NET software. Our customers acquire a large amount of data from 3D measurements which they do not work with anymore. We help them with the collection of data and the generation of outcomes. We support imports from measuring devices from a wide range brands, including DEA, Zeiss, Mitutoyo, Werth, Nikon, Wenzel and Mazak.

Read on...